Tif ACL2500 Refrigerant Leak Detector User Manual

ACL2500RefrigerantLeak DetectorOwner’s Manual

2. Take care not to contaminate the detector probe tip if the part being tested iscontaminated. If the part is particularly dirty, or condensate (mois

All Systems -8. Following any service to the refrigerant system and any other service which dis-turbs the refrigerant system, a leak test of the repai

3. If the tip itself is dirty it can be cleaned by immersing in a mild solvent, such asalcohol, for a few seconds, and then using compressed air an

Power Supply: 3V DC; two “C” cell Alkaline batteriesMaximum Sensitivity: Per SAE J1627 Rating Criteria; Certified for R12, R22 and R134a @ 0.5 oz/y

100839ACL RevAToll Free Customer Service: 1-800-327-5060Designed & Engineered in the USAManufactured in China

THIS MODEL IS:DESIGN CERTIFIED BY MET LABORATORIES, INC. TO MEET SAE J1627 FOR R134a, R12 AND R22.CLASS 1 DIVISION 2 GROUPSC & D HAZARDOUS LOCATI

1General Information...2Features...

Thank you for purchasing the MAC TOOLS Refeigerant Leak Detector.The ACL2500 is the most stable and sensitive negative corona Leak Detector evermade.A

3PARTS & CONTROLS1. Sensing Tip2. Tip Protector3. Power On/OFF4. Battery Test5. Reset Button6. Audio Mute7. Sensitivity Up8. Sensitivity Down9. LE

Installing Batteries1. Remove the battery compartment door located on the bottom of the instrument,as shown below. Install batteries, Positive Polari

5OPERATING FEATURES• Battery Test Function. This feature is activated by pressing the Battery Test key.When pressed, the LED’s will display a three co

When the unit is switched on, it is set to sensitivity level 5.1. To adjust the sensitivity, press the SENSITIVITY a or SENSITIVITY b key.When the key

OPERATION: 1. Switch the unit on by pressing the ON/OFF key. The display will illuminate withthe reset indication (Left LED green, all others Orange)